View SE2620T_4813632.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet SE2620T: 2.4 ghz wireless lan/bt front end preliminary skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com dst-00482 ? rev 1.4 skyworks proprietary information products and product information are subject to change without notice april 16, 2012 1 of 13 applications ? ieee802.11b dsss wlan ? ieee802.11g,n ofdm wlan features ? dual mode ieee802.11b & ieee802.11g ? integrated pa, harmonic filter, lna and bt port ? integrated positive slope power detector ? 18 dbm @ 3 % evm, 802.11g, 54 mbps ? 3.3 v or 5.0v nominal supply on vcc1, vcc2. ? lead free, halogen free and rohs compliant ? compact package, 3 x 3 x 0.6 mm, msl 1 ordering information part no. package remark SE2620T 16 pin qfn samples SE2620T-r 16 pin qfn tape and reel SE2620T-ek1 n/a evaluation kit product description the SE2620T is a complete 802.11 b/g/n wlan rf front-end module with a bluetooth port. the device provides all the functionalit y of the power amplifier, power detector, harmonic filtering, switch, low noise amplifier, and associated matching. the SE2620T provides a complete 2.4 ghz wlan rf solution from the output of the transceiver to the antenna, and from the antenna to the input of the transceiver, in an ultra compact form factor. the SE2620T is designed for ease of use, with all the critical matching and harm onic filtering integrated, also offering a simple 50 ? interface to the antenna. the SE2620T includes a low noise amplifier to increase the receive sensitivity of embedded solutions to improve range or to over come the insertion loss of cellular filters often included for mobile applications. the SE2620T also includes a transmitter power detector with 20 db of dynamic range and a digital enable control for transmitter power ramp on/off control. functional block diagram figure 1: functional block diagram det tx 50 ? & filter det ant rx 50 ? & filter bt len vcc1 vcc2 ctx crx pen bias & control cbt www.datasheet.co.kr datasheet pdf - http://www..net/
data sheet SE2620T: 2.4 ghz wireless lan/bt front end preliminary skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com dst-00482 ? rev 1.4 skyworks proprietary information products and product information are subject to change without notice april 16, 2012 2 of 13 pin out diagram figure 2: SE2620T pin out (top view through package) 1 2 3 4 12 11 10 9 16 15 14 13 56 7 8 vcc2 det vcc1 tx nu ant gnd cbt bt crx len vdd nu pen gnd rx 1 2 3 4 12 11 10 9 16 15 14 13 5 6 7 8 paddle = gnd www.datasheet.co.kr datasheet pdf - http://www..net/
data sheet SE2620T: 2.4 ghz wireless lan/bt front end preliminary skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com dst-00482 ? rev 1.4 skyworks proprietary information products and product information are subject to change without notice april 16, 2012 3 of 13 pin out description pin no. name description 1 vcc2 pa positive power supply 2 det power detector output 3 vcc1 pa positive power supply 4 tx transmit port 5 nu pin not used. open circuit in the package 6 pen pa enable control input 7 gnd ground 8 rx receive port 9 vdd lna and switch positive power supply 10 len lna enable control input 11 crx receive antenna switch control 12 bt bluetooth port 13 cbt bluetooth antenna switch control 14 gnd ground 15 ant antenna port 16 nu pin not used. open circuit in the package die paddle gnd ground www.datasheet.co.kr datasheet pdf - http://www..net/
data sheet SE2620T: 2.4 ghz wireless lan/bt front end preliminary skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com dst-00482 ? rev 1.4 skyworks proprietary information products and product information are subject to change without notice april 16, 2012 4 of 13 absolute maximum ratings these are stress ratings only. exposure to stresses beyond these maximum ratings (one rating applied at a time) for extended periods may cause permanent damage to, or affect the reliability of the device. avoid operating the device outside the recommended operating conditions defined below. this device is esd sens itive. handling and assembly of this device should be at esd protected workstations. symbol definition min. max. unit vcc pa supply voltage on vcc1, vcc2 -0.3 6.0 v vdd lna and switch supply voltage -0.3 3.6 v v in dc input on control pins -0.3 3.6 v p txin tx input power, ant terminated in 50 ? match - 0 dbm t a operating temperature range -40 85 c t stg storage temperature range -40 150 c esd hbm jedec jesd22-a114 all pins 1000 v recommended operating conditions symbol parameter min. typ. max. unit t a ambient temperature -40 25 85 c vcc pa supply voltage, relative to gnd = 0 v 2.7 3.3 5.25 v vdd lna supply voltage, relative to gnd = 0 v 2.7 3.3 3.6 v dc electrical characteristics conditions: vcc = pen = vdd= 3.3 v, t a = 25 ? c, as measured on skyworks solutions? SE2620T-ek1 evaluation board (de-embedded to device), all unused ports term inated with 50 ohms, unless otherwise noted symbol parameter conditions min. typ. max. unit i cc-g total supply current pout = 18 dbm, 54 mbps ofdm signal, 64qam - 140 ma i cc-b total supply current p out = 20 dbm, 11 mbps cck signal, bt = 0.45 - 160 ma i cq quiescent current no rf - 110 ma i cc_off total supply current, vcc1 + vcc2 (pa) no rf applied, mode 0 - - 10 a i dd_off total supply current, vdd (lna/sw) no rf applied, mode 0 - 18 30 a i cc_lna lna supply current len =3.3v - 10 13 ma i cc_lna_ byp lna bypass supply current len=0 50 a www.datasheet.co.kr datasheet pdf - http://www..net/
data sheet SE2620T: 2.4 ghz wireless lan/bt front end preliminary skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com dst-00482 ? rev 1.4 skyworks proprietary information products and product information are subject to change without notice april 16, 2012 5 of 13 control logic characteristics conditions: vcc = vdd=3.3v, t a = 25 ? c, as measured on skyworks solutions? SE2620T-ek1 evaluation board (de- embedded to device), all unused ports termina ted with 50 ohms, unless otherwise noted. symbol parameter conditions min. typ. max. unit v ih logic high voltage - 2.7 - 3.6 v v il logic low voltage - 0 - 0.4 v i ih input current logic high voltage pen all other pins - - 100 10 a i il input current logic low voltage - - 1 a control logic table mode# mode description cbt crx pen len 0 all off 0 0 0 0 1 tx ? ant 0 0 1 0 2 rx high gain ? ant 0 1 0 1 3 rx low gain (bypass) ? ant 0 1 0 0 4 bt ? ant 1 0 0 0 www.datasheet.co.kr datasheet pdf - http://www..net/
data sheet SE2620T: 2.4 ghz wireless lan/bt front end preliminary skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com dst-00482 ? rev 1.4 skyworks proprietary information products and product information are subject to change without notice april 16, 2012 6 of 13 ac electrical characteristics 802.11g transmit characteristics conditions: vcc = pen = vdd = 3.3 v, cbt = len = crx = 0v, t a = 25 ? c, as measured on skyworks solutions? SE2620T-ek1 evaluation board, all unused ports terminated with 50 ohms, unless otherwise noted. symbol parameter condition min. typ. max. unit f in frequency range - 2.4 - 2.5 ghz pout output power 54mbps, ofdm, 64 qam, evm = 3% - 18 - dbm 11mbps, cck, bt = 0.45, mask - 20 - s 21 small signal gain - 26 db s 21 small signal gain variation over band - - - 2.0 dbpp 2f, 3f harmonics p out = 20 dbm, 1 mbps, 802.11b - -42 - dbm/mhz pout = 18dbm, ofdm, 64qam - - -45 t dr , t df delay and rise/fall time 50 % of v pen edge and 90/10 % of final output power level - - 400 nsec s 11 input return loss tx port - -12 -10 db stab stability cw, p in = -2 dbm, 0.1 ghz ? 20 ghz load vswr = 6:1 all non-harmonically related outputs less than -43 dbm/mhz rggd ruggedness cw, p in = 5 dbm, 0.1 ghz ? 20 ghz load vswr = 10:1 no permanent damage or performance degradation conditions: vcc = 5.0v, pen = vdd = 3.3 v, cbt = len = crx = 0v, t a = 25 ? c, as measured on skyworks solutions? SE2620T-ek1 evaluation board, all unused ports terminated with 50 ohms, unless otherwise noted. symbol parameter condition min. typ. max. unit f in frequency range - 2.4 - 2.5 ghz pout output power, vcc = 5.0v 54mbps, ofdm, 64 qam, evm = 3% - 21 - dbm 11mbps, cck, bt = 0.45, mask - 21 - s 21 small signal gain - 26 db s 21 small signal gain variation over band - - - 2.0 dbpp 2f, 3f harmonics p out = 21 dbm, 1 mbps, 802.11b - -37 - dbm/mhz p out = 21 dbm, ofdm, 64qam - -45 t dr , t df delay and rise/fall time 50 % of v pen edge and 90/10 % of final output power level - - 400 nsec s 11 input return loss tx port - -12 -10 db stab stability cw, p in = -2 dbm, 0.1 ghz ? 20 ghz load vswr = 6:1 all non-harmonically related outputs less than -43 dbm/mhz www.datasheet.co.kr datasheet pdf - http://www..net/
data sheet SE2620T: 2.4 ghz wireless lan/bt front end preliminary skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com dst-00482 ? rev 1.4 skyworks proprietary information products and product information are subject to change without notice april 16, 2012 7 of 13 symbol parameter condition min. typ. max. unit rggd ruggedness cw, p in = 0 dbm, 0.1 ghz ? 20 ghz load vswr = 10:1 no permanent damage or performance degradation bluetooth characteristics conditions: v cc = 5.0v or 3.3v, cbt = vdd = 3.3v, crx = len = pen = 0v, t a = 25 ? c, as measured on skyworks solutions? SE2620T-ek1 evaluation board, all unus ed ports terminated with 50 ohms, unless otherwise noted. symbol parameter condition min. typ. max. unit f out frequency range - 2400 - 2500 mhz bt il insertion loss - 0.5 0.8 db s 11 bt port return loss -12 db isol sw switch isolation 24 db 2.4 ghz receive characteristics conditions: vcc = 5.0v or 3.3v, len = crx = vdd = 3.3v, pen = cbt = 0 v, t a = 25 ? c, as measured on skyworks solutions? SE2620T-ek1 evaluation board, all unus ed ports terminated with 50 ohms, unless otherwise noted. symbol parameter condition min. typ. max. unit f out frequency range - 2400 - 2500 mhz s 21 receive gain, lna enabled. in band ? 2.4 ? 2.5 ghz 11 13 15 db 4.9 ? 5.9 ghz - -8 - s 21 gain variation 2400 ? 2485 mhz, over any 20mhz band - - 0.5 db nf noise figure - 1.8 - db iip3 third order intercept - 5 - dbm s 11 input return loss - - -10 - db s 22 output return loss - -10 - db ip1db input p1db cw -6 -5 dbm tx leak transmit power at rx output pen = vdd = 3.3 v, cbt = len = crx = 0v 24dbm at the ant port - - -15 dbm rx 5int max 5ghz interferer amplitude <0.1db degradation of gain or nf at 2.4 ? 2.5 ghz - - 0 dbm t en enable time 10% to 90% of rx rf power, from time that len is at 50% - - 400 nsec s 21 -byp receive gain, lna len = 0 v -5 -3 -1 db www.datasheet.co.kr datasheet pdf - http://www..net/
data sheet SE2620T: 2.4 ghz wireless lan/bt front end preliminary skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com dst-00482 ? rev 1.4 skyworks proprietary information products and product information are subject to change without notice april 16, 2012 8 of 13 symbol parameter condition min. typ. max. unit bypassed s 11 -byp input return loss, lna bypassed len = 0 v - -10 - db isol sw switch isolation 20 - - db power detector characteristics conditions: vcc = pen = vdd = 3.3 v, cbt = len = crx = 0v, t a = 25 ? c, as measured on skyworks solutions? SE2620T-ek1 evaluation board, unless otherwise noted. symbol parameter condition min. typ. max. unit f out frequency range - 2400 - 2500 mhz pdr power detect range, cw measured at ant 0 - 22 dbm pdz load output impedance - - 2.2 - k ? pdv norf output voltage, p out = no rf, measured into 1m ? vcc = 3.3v - 0.2 - v vcc = 5.0v pdv p18 output voltage, p out = 18 dbm cw, measured into 1m ? vcc = 3.3v - 0.81 - v vcc = 5.0v pdv p21 output voltage, p out = 21 dbm cw, measured into 1m ? vcc = 5.0v - 1.1 - v pdv p21 output voltage, p out = 21 dbm cw, measured into 1m ? vcc = 5.0v - 1.5 - v pd bw detector bandwidth - 1 - mhz www.datasheet.co.kr datasheet pdf - http://www..net/
data sheet SE2620T: 2.4 ghz wireless lan/bt front end preliminary skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com dst-00482 ? rev 1.4 skyworks proprietary information products and product information are subject to change without notice april 16, 2012 9 of 13 package handling information because of its sensitivity to moisture absorption, instructions on the shipping c ontainer label must be followed regarding exposure to moisture after the container seal is broken, ot herwise, problems related to mo isture absorption may occur when the part is subjected to high tem perature during solder assembly. the SE2620T is capable of withstanding a pb free solder reflow. care must be taken when attaching this produc t, whether it is done manually or in a production solder reflow environment. if the part is manually attached, precaution shoul d be taken to insure that the device is not subjected to temperatures above its rated peak temper ature for an extended period of time. fo r details on both attachment techniques, precautions, and handling procedures recommended, please refer to: ? ?quad flat no-lead module solder reflow & rework information?, document number qad-00045 ? ?handling, packing, shipping and use of moisture sensitive qfn?, document number qad-00044 caution! class 1c esd sensitive device www.datasheet.co.kr datasheet pdf - http://www..net/
data sheet SE2620T: 2.4 ghz wireless lan/bt front end preliminary skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com dst-00482 ? rev 1.4 skyworks proprietary information products and product information are subject to change without notice april 16, 2012 10 of 13 branding information the device branding is shown in figure 3. figure 3: SE2620T branding and pin 1 location package diagram the package diagram is shown in figure 4. top side bottom side 16 4 9 15 14 13 310 211 112 5678 16 4 5 9 15 6 14 7 13 8 3 10 2 11 1 12 figure 4: SE2620T package diagram 2620t www.datasheet.co.kr datasheet pdf - http://www..net/
data sheet SE2620T: 2.4 ghz wireless lan/bt front end preliminary skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com dst-00482 ? rev 1.4 skyworks proprietary information products and product information are subject to change without notice april 16, 2012 11 of 13 recommended pcb footprint and solder pattern 16 14 7 5678 16 4 9 15 14 13 310 211 112 5678 16 4 9 15 14 13 310 211 112 5 678 5 16 49 15 14 13 310 211 112 figure 5: pcb footprint and solder pattern tape and reel information paramete r v alue devices per reel 3000 reel diameter 13 inches tape width 12 millimeters figure 6: SE2620T-r tape and reel information. www.datasheet.co.kr datasheet pdf - http://www..net/
data sheet SE2620T: 2.4 ghz wireless lan/bt front end preliminary skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com dst-00482 ? rev 1.4 skyworks proprietary information products and product information are subject to change without notice april 16, 2012 12 of 13 document change history revision date notes 1.0 apr-19-2011 initial release 1.1 may-17-2011 updated pa supply voltag e options in ?features? section. 1.2 nov-14-2011 updated maximum input power limit report complete 5v operation under tx and detector characteristics add rx characteristics in the presence of a 5ghz jammer. add tx leakage at the rx out port, under maximum tx output drive 1.3 jan- 03- 2012 updated 5v supply limit updated harmonics 1.4 apr-16-2012 updated with skyworks logo and disclaimer statement www.datasheet.co.kr datasheet pdf - http://www..net/
data sheet SE2620T: 2.4 ghz wireless lan/bt front end preliminary skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com dst-00482 ? rev 1.4 skyworks proprietary information products and product information are subject to change without notice april 16, 2012 13 of 13 copyright ? 2012 skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyworks solutions, inc. (?skyworks?) products or services. these m aterials, including the information contained herein, are provided by skyworks as a service to its customers and may be used for informational purposes only by the customer. skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other diff iculties arising from any future changes. no license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document . skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of skyworks products, information or mate rials, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are provided ?as is? without warranty of any kind, whether express, implied, statutory, or otherwise, including fitness for a particular purpose or use, merchantability, performance, quality or non-infringement of any intellectual property right; all such warranties are hereby expressly disclaimed. skyworks does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these materials. skyworks shall not be liable for any damages, including but not limited to any special, indirect, incidental, statut ory, or consequential damages, including without limitation, lost revenues or lost profits that may result from the use of the materials or information, wheth er or not the recipient of materials has been advised of the possibility of such damage. skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyworks customers using or selling skyworks products for use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications using skyworks products, which may deviate from published specifi cations as a result of design defects, errors, or operation of products outside of published parameters or design specifications. customers should include design and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of skyworks products ou tside of stated published specifications or parameters. skyworks, the skyworks symbol, and ?breakthrough simplicity? are trademarks or registered trademarks of skyworks solutions, inc ., in the united states and other countries. third-party brands and names are for identification purposes only, and are the property of their respective owners. additional information, includ ing relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of SE2620T

	To Download SE2620T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .